Newsroom

The iControls Marketing Hub is a reliable, centralized destination for accessing our most essential marketing materials. It’s a curated Google Drive folder that provides quick access to iControls assets.

Whether you’re looking for the latest sell sheet, product photos or support videos, the Marketing Hub has you covered.

Scan the QR code in the attached graphic to open the iControls Marketing Hub instantly or bookmark this direct link for future reference.

The Marketing Hub is continually updated, so check back regularly. We hope you find it a useful resource for iControls products.

Sectional and rolling steel doors commonly use torsion springs to counterbalance the door’s weight. Over time, and with repeated use, the springs can relax and cause a door to become unbalanced. This imbalance may strain components, cause door drift and even lead to premature torsion spring failure.

PULSE operators (Series 100, 200 and 300) include a diagnostic feature to detect door imbalance. The Automatic Balance Check, accessible from the control panel menu, runs the door through a full cycle and displays the force required to open versus close the door.

A difference in these figures indicates the degree of imbalance. Adjusting the spring tension based on these results to get these numbers as close as possible will help restore proper balance without removing the operator or relying on guesswork. A balanced door will extend spring life and improve battery backup performance.

To learn more about PULSE commercial door openers and their safety and performance features, visit our product page.

All commercial overhead doors on the market today include some form of safety monitoring. Typically, this means a reflective or thru-beam photo-eye to detect obstructions while the door is closing. PULSE operators offer more to enhance safety.

Yes, all iControls PULSE door operators come equipped with either a polarized photo-eye or a thru-beam, depending on model. These safety components are mandated by UL and provide a good first line of defense but may not effectively prevent every incident.

For increased safety, PULSE operators (Series 100, 200 and 300) feature built-in intelligent force monitoring. This system continuously monitors the door while it is in motion and detects any abnormal force.

When closing, if the door encounters resistance or hits an obstruction, the operator halts and reverses direction. Should the door be obstructed during opening (ie. due to ice buildup, door latch engagement, door jam) this safety feature will stop the door to prevent further possible damage. This responsive action helps reduce the risk of harm and equipment damage. Force monitoring sensitivity is field adjustable for both opening and closing cycles

Intelligent force monitoring adds a valuable layer of protection for commercial doors using PULSE door openers. To learn more about their many safety and performance features, visit our PULSE commercial operators page.

The iControls website’s URL has changed from icontrols.ca to icontrolsglobal.com. This update marks an important step in our commitment to enhancing our global reach.

All content and resources previously available on icontrols.ca remain unchanged. Visitors to the original domain will be automatically redirected to the new site, ensuring a smooth and uninterrupted experience.

We encourage you to visit the new domain and view our extensive product offering good for most international markets.

If you have any questions regarding this transition, or our products, please contact us at [email protected].

Thank you for your continued support.

Commercial overhead doors, whether sectional or rolling steel, require substantial energy to operate. This constant mechanical demand places considerable stress on door operators, potentially increasing wear and impacting performance over time.

PULSE operators from iControls mitigate this issue with integrated “Soft Start, Soft Stop” functionality, engineered to optimize motion control and extend component longevity.

How It Works
When the operator begins to open the door, it moves at a slower speed for a preset distance. After this gradual “soft” start, it accelerates to the selected operating speed. As the door approaches the end of its cycle, it slows again for a preset distance before coming to a full stop. The same process occurs, in reverse, during the closing cycle.

Operational Benefit
This feature minimizes mechanical shock, reducing stress on drive systems and structural hardware. Over time, it helps preserve operational integrity, decrease maintenance intervals and improve door responsiveness.

To learn more about “Soft Start, Soft Stop” functionality and explore the full range of performance and safety features offered by PULSE operators, visit our product page.

iControls is proud to be a Bronze Sponsor at the CDI Ontario Golf Tournament on October 2, 2025 at Glen Eagle Golf Club in Caledon, Ontario.

We’re stepping up as the “Closest to the Building Part” sponsor, bringing a fun twist to the tee box while celebrating the incredible people who keep the door industry moving.

Looking forward to a great day of golf, connection, and community. See you out on the course!